流量范围:600~2800L/H Flow range: 600 ~ 2800L / H
压力范围: 1.0~0.1MPA Pressure range: 1.0 ~ 0.1MPA
电机功率: 220V / 380V / 110V / 50/60Hz Motor power: 220V / 380V / 110V / 50 / 60Hz
驱动系统: 两相、三相标准电机或防爆电机 Drive system: two-phase, three-phase standard motor or explosion-proof motor
防护等级: IP55, IP54, Protection level: IP55, IP54,
工作条件
Working condition
环境温度: -30℃ --- 80℃
Ambient temperature: -30 ℃ --- 80 ℃
1、铸铝壳体,散热性能高,整体重量轻,适用各种酸碱药液,无毒无味。
2、采用偏心曲轴机构,径向滑运调节流量。 1. Cast aluminum shell, high heat dissipation performance, light weight, suitable for all kinds of acid-base chemicals, non-toxic and tasteless.
3、接触介质泵头为PVC、可选PTFE、及不锈钢材质。 2. Adopt eccentric crankshaft mechanism, adjust flow by radial sliding.
4、性价比高,它可以传输中等粘度介质,腐蚀性液体和危险性的化学品。 3. The contact media pump head is PVC, optional PTFE, and stainless steel.
5、在泵运行或停止时也可任意调节流量也可定量输出。 4. High cost performance, it can transmit medium viscosity medium, corrosive liquid and dangerous chemicals.
5. When the pump is running or stopped, the flow can also be adjusted arbitrarily and the output can be quantitative.
尺寸单位: | mm | ||||||||
size Unit: | |||||||||
型号 | 流量 L/H | 压力/Mpa | 泵速/min-1 | 膜片规格 | 电机功率KW | 进出口径联接方式 | 重 量/KG | ||
Inlet and outlet diameter connection mode | |||||||||
Model | Flow L/H | Pressure/Mpa | Pump speed/min-1 | Diaphragm size | Motor Power/KW | PVC | PVDF | SUS304/316 | weight/KG |
GB600/0.7 | 600 | 0.7 | 96 | 145 | 0.75 | DN32 | DN32 | Rc1″ 内螺纹 | 22 |
GB700/0.7 | 700 | 0.7 | 144 | ||||||
GB800/0.7 | 800 | 0.7 | 144 | ||||||
GB900/0.7 | 900 | 0.7 | 144 | ||||||
GB1000/0.5 | 1000 | 0.5 | 144 | 40 | |||||
GB1200/0.4 | 1200 | 0.4 | 144 | 185 | 1.5 | DN40 | Rc11/2″ 内螺纹 | ||
GB1500/0.4 | 1500 | 0.4 | 188 | DN40 | |||||
GB1800/0.3 | 1800 | 0.3 | 188 | ||||||
GB2000/0.3 | 2000 | 0.3 | 188 | 50 | |||||
GB2500/0.2 | 2500 | 0.2 | 144 | ||||||
GB2800/0.1 | 2800 | 0.1 | 144 | ||||||
泵头 | 隔膜 | 球阀 | 阀座O形圈 | 药品类 | |||||
Pump head | Diaphragm | Ball valve | Seat O-ring | ||||||
PVC | PTFE/EPDM | 陶瓷Ceramic | PTFE/EPM | 次亚氯酸钠、PAC、硫酸、尿素、磷酸、消泡剂、 | |||||
硫酸铝、氯化亚铁、盐酸、氯化铝、氯化钙等 | |||||||||
Sodium hypochlorite, PAC, sulfuric acid, urea, phosphoric acid, antifoam, | |||||||||
Aluminum sulfate, ferrous chloride, hydrochloric acid, aluminum chloride, calcium chloride, etc. | |||||||||
SUS304/316 | SUS304/316 | EPDM | 凝集剂、阿摩尼亚水、联氨、烧碱 | ||||||
PTFE | Agglutinating agent, Ammonian water, hydrazine, caustic soda |